D-500 High Shear Homogenizer
Product Description
High quality 316L stainless steel with corrosion and autoclave resistance
Rotor with simple design can be dismounted, cleaned, and sterilized conveniently
6 speed levels
Applicable for sample with viscosity up to 10000mPa.s
Replaceable rotors and stators sharing the same shaft, cost-effective
Automatic overload protection mechanism maximizes the working life of motor.
Smooth motor start, stable acceleration without spillage risk
Parameters
Model | D-500 |
Speed range | 10000-30000rpm |
Max linear velocity | 22.7-36m/sec |
Speed Level | 6 stage |
Working volume | 10-40000mL |
Max. viscosity | 10000mPa·s |
Material of dispersing shaft | SS 316L stainless steel, PTFE |
Noise Level | 79dB(A) |
Protection class | IP20 |
Voltage, frequency | 110-120V/60Hz, 220-240V/50-60Hz |
Power | 500W |
Motor type | AC carbon brush motor |
Dimension [WxDxH] | 75x75x280mm |
Permissible ambient temperature and humidity | 0-40℃, 85%RH |
DS-500/1 |
Solid and liquid dispersion Volume 10-5000mL Max. circum. Speed 22.7m/sec General purpose Emulsion granularity range 1-10μm Suspension granularity range 10-50μm |
DS-500/2 |
Emulsion Volume 10-5000mL Max. circum. Speed 22.7m/sec General emulsion purpose Emulsion granularity range 1-10μm Suspension granularity range 10-50μm |
DS-500/5 |
Small amounts of solid and liquid dispersion Volume 1-50mL Max. circum. Speed 5.8m/sec Compatible with 5mm stator and 3.8mm rotor Special design for 1-50mL tissue homogenization, mixing and suspension in Eppendorf tube, tube strip and centrifuge tubes for clinical and diagnostic application |