Protein Electrophoresis & Transblot System FL-Mini04
Product Description
Features
1. The edge sealing gasket is permanently fixed to the long glass plate, ensuring precise alignment of the glass plates and preventing gel leakage.
2. The cam-locked gel casting frame is easy to operate, enabling precise alignment of the glass plates on any flat surface.
3. The special plastic electrophoresis comb does not inhibit gel polymerization, and its built-in ridges prevent contact with air.
4. The long glass plate with edge sealing gasket is thickened and resistant to breakage.
5. The parallel-aligned integrated gel casting frame allows simultaneous observation of two gels, and an independent gel casting frame is also available as an optional accessory.
6. The 99.99% high-purity platinum electrode offers superior electrical conductivity and excellent resistance to corrosion and aging.
Specifications
Technical Parameters
1. Number of Gels: 1–4
2. Glass Plate Dimensions: Long (thick) plate 101×82mm
3. Short (thin) plate 101×73 mm
4. Gel Dimensions: Hand-cast gel 83×73 mm
5. Precast gel 86×68 mm
6. Gel Thickness: 0.75, 1.0, 1.5 mm (optional)
7. Optional Sample Combs: 10, 12, 15 teeth
8. Dimensions: 16×12×18cm
9. Buffer volume: 700 mL for 1–2 gels
1000 mL for 4 gels
Standard Configuration
| Name | Unit | Quantity |
|---|---|---|
| Upper lid of electrophoresis tank (with wires) | SET | 1 |
| Lower casing of electrophoresis tank | PC | 1 |
| Main electrode core | PC | 1 |
| Auxiliary electrode core | PC | 1 |
| 1.0mm thick glass plate for gel casting | PC | 5 |
| Thin glass plate for gel casting | PC | 5 |
| 1.0mm 10-tooth sample comb | PC | 5 |
| Gel casting base | PC | 2 |
| Gel clamping frame | PC | 4 |
| Single gel baffle | PC | 1 |
| Gel spatula | PC | 1 |
| Glass drying rack | PC | 1 |